NO: E-29021|61985|2024|Electrical(HQ)                                                                                                                                                                                                                                           Dhanbad, Date: 24.09.2024

DGMS APPROVAL NO.- 631 of 2011(Renewal Approval)

From

Director General of Mines Safety
Directorate General of Mines Safety,
P.O & Distt: Dhanbad - 826 016.

To

HARESH B. DHOOT, FLAMEPROOF EQUIPMENTS PVT LTD, FLAMEPROOF EQUIPMENTS PVT LTD FLAMEPROOF HOUSE, PLOT NO. B-39, NEAR MONGINIS CAKE FACTORY, NEW LINK ROAD, ANDHERI WEST
Maharashtra, MUMBAI, MUMBAI, 400053

Subject: Approval under Regulation 208 (3) of the Coal Mines Regulations, 2017 for flameproof and weatherproof control panel, in M.S. fabricated & cast iron construction rated upto 600 A, upto 500 V AC (max.),  designated by type no. FLP-RH-SB-13 manufactured by M/s. Flameproof Equipments Pvt. Ltd., Mumbai-400053 conforming to IS/IEC 60079-0:2017 and IS/IEC: 60079-1:2014 for use in belowground Coal Mines– Renewal thereof.

Sir,

Please refer to your online application No. E-29021/61985/2024/Electrical (HQ)dated 03.07.2024 on the above subject and CIMFR Test Report No. IN/CIMFR/TR20/R/3167 dated 06/112020 and the associated drawing nos. FEPL/PANEL/SB/13 Rev.02 and other documents submitted therewith in this regard. 

 I, in exercise of powers conferred upon Chief Inspector of Mines (also designated as Director General of Mines Safety) under Regulation 208(3) of the Coal Mines Regulations, 2017, hereby renew the approval (DGMS Approval No. 631 of 2011) granted vide this Directorate's letter No. 306/2171/EHQ dated 15.11.2011 for a further period of two years, i.e. up to 15.11.2025 for use in belowground Coal Mines. 

In the interest of safety, the OEM guidelines shall be adhered to and spares, supplied by OEM shall only be used while maintaining the machine/Equipment. The conditions mentioned in the original approval and subsequent renewal letters, if any, shall be strictly complied with and the test reports of all the electrical items covered under approval, conforming to the latest testing standards, shall be submitted within three months, if not submitted before.

 Please note that application for renewal should be made at least three (03) months before the date of expiry of the approval.