emblem
  • भारत सरकार
  • GOVT. OF INDIA
  • श्रम एवं रोजगार मंत्रालय
  • MINISTRY OF LABOUR AND EMPLOYMENT
  • खान सुरक्षा महानिदेशालय
  • DIRECTORATE GENERAL OF MINES SAFETY

Application

Approval Letter View

Approved No :- DGMS APPROVAL NO.-489 of 2003

NO: E-29021|61713|2023|Electrical(HQ)                                                                                                                               Dhanbad, Date: 20.12.2023

 

                                                                                                             DGMS APPROVAL NO.- 489 of 2003

From

Director General of Mines Safety
Directorate General of Mines Safety,
P.O & Distt: Dhanbad - 826 016.

To

RAKESH KUMAR, SAFEX (INDIA), ASHIRWAD COMPLEX , P.O- NAGNAGAR ,
Jharkhand, DHANBAD, DHANBAD, 826004

Sub:  Approval No. 489 of 2003 under Regulation 208 (3) of the Coal Mines Regulations, 2017 for Flameproof fluorescent Tube light fitting in mild steel/cast iron construction designated by type No.- FTL-40, rated 2x20W, 125 V AC (Max) for Group -I atmosphere manufactured by  M/s. Safex(India), Dhanbad conforming to IS/IEC 60079-1:2014, IS/IEC 60079-0:2017  for use in belowground Coal Mines – Permissible variation thereof.

 

Dear Sir,

Please refer to your online application No. 61713 dated 03.11.2023 and letter No.SI/DGMS/FTL-40/23-24/179 dated 04.11.2023 on the above subject & test reports and other documents submitted therewith in this regard.

The matter has been examined and based on the CIMFR test report No. IN/CIMFR/TR23/S/H287 dated 03.11.2023, following permissible variation is allowed without affecting flameproof features of the above apparatus subject to fulfillment of the conditions stipulated in DGMS approval No.  489 of 2003:

i) Alternatively the Fluorescent Tube Light fitting may be fitted with inbuilt or separate Isolator / Rotary Switch / Switch and with or without wire guard without altering the total flameproof features.

ii) Alternatively the Fluorescent Tube Light fitting may be used upto and within 2 x 100 W or 4 x 50 W or 5 x 40 Watt and with different (either of the) combination of COB/SMD/Cluster of LED at 110/125 V AC with or without mirror polished reflector.

iii) Alternatively the equipment is suitable for rating upto and within 100 watt with combination of 2/3/4 nos. cluster of LED/LED bulb at 110/125 V AC.

iv) The equipment may be used as Flameproof Face light fitting or Flameproof Flood Light fitting upto and within 200 watt COB/SMD/Cluster of LED at 110/125 V AC.

v) Alternatively the Fluorescent Tube Light fitting Type FTL-40 may be termed as Flameproof Tube Light fitting (Compact design) or Flameproof LED Light fitting, overall length 450 mm to 500 mm ±10% by volume with flat toughened glass.
 

This letter shall always be accompanied by any previous letters for inclusion of permissible variations and Directorate’s approval and renewal thereof.

 

Yours Sincerely,

(PRABHAT KUMAR)
Director General of Mine Safety 
Date : 20.12.2023
THIS IS A SYSTEM GENERATED DOCUMENT, DOES NOT REQUIRE ANY SIGNATURE.
Back