emblem
  • भारत सरकार
  • GOVT. OF INDIA
  • श्रम एवं रोजगार मंत्रालय
  • MINISTRY OF LABOUR AND EMPLOYMENT
  • खान सुरक्षा महानिदेशालय
  • DIRECTORATE GENERAL OF MINES SAFETY

Application

Approval Letter View

Approved No :- DGMS APPROVAL NO.-E_504/2004
NO: E-29021|120|2018|Electrical(HQ) Dhanbad, Date: 27/03/2018
DGMS APPROVAL NO.-E_504/2004
From
Director General of Mines Safety
Directorate General of Mines Safety,
P.O & Distt: Dhanbad - 826 016.
 
To
DHRUBO MUKERJEE, SAIT MINE LINE PVT. LTD., 52 GOLF CLUB ROAD, KOLKATA - 700 033
West Bengal, Kolkatta, Kolkata, 700033
 

Sub:   DGMS approval under Regulation ____ of the ____ for Flameproof/Weatherproof ____, designated by Type: ____ conforming to IS/IEC ____,IS/IEC:____ and IS/IEC ____manufactured by M/s. ____ for use in ____ mines.

 
IDENTIFICATION MARK
 Approval Number: DGMS APPROVAL NO.-E_504/2004 BIS License:
Equipment Name :Flame Proof Gate End Cum Starter
Validity StartDate: 03/02/2013 Validity EndDate:13/02/2018 
Dear Sir/Mam
 

                           Based on the performance report received from _______and test reports under reference / as per annexure-_______, I hereby accord approval for _______ (as per  Annexure-B) manufactured by M/s. _______ for use in ______ mines in India for a period of (5) years from the date of issue of this letter, subject to compliance with conditions  stipulated in Annexure-_____.

                          The application for renewal should be made at least three (03) months before the date of expiry of the approval.

 
Your Faithfully,
(Prasanta Kumar Sarkar)
Director General of Mine Safety - Dhanbad (HQ)
Date : 27/03/2018
THIS IS A SYSTEM GENERATED DOCUMENT, DOES NOT REQUIRE ANY SIGNATURE.
Back

Renewal Letter View

Approved Renewal No :- Ren_E_29845
NO: E-29021|120|2018|Electrical(HQ) Dhanbad, Date: 23/05/2018
 
From
Director General of Mines Safety
Directorate General of Mines Safety,
P.O & Distt: Dhanbad - 826 016.
 
To

DHRUBO MUKERJEE- DIRECTOR,

SAIT MINE LINE PVT. LTD., 52 GOLF CLUB ROAD, 
West Bengal, Kolkatta, Kolkata, 700033

 

Sub: Renewal of Approval No. 504 of 2004 under Regulation 208 (3) of the Coal Mines Regulations, 2017 for flameproof gate end box cum starter rated upto 90 KW at upto 550 V, designated by type No. KSL-1 in mild steel fabricated flameproof enclosure manufactured by M/S SAIT Mine Line Pvt. Ltd., Kolkata conforming to IS/IEC 60079-1:2007, IS/IEC 60079-0:2004 and IS/IEC 60079-11:2006 for use in belowground Coal Mines.

Ref:    CIMFR test report Nos. CIMFR/TC/SR/1361 dated 11.01.2013, CIMFR/TC/P/480 dated 13.09.2013.

IDENTIFICATION MARK
 Approval Number: DGMS APPROVAL NO.-E_504/2004/1 BIS License: CM/L-5805269
Equipment Name :Flame Proof Gate End Cum Starter
Validity StartDate: 13/02/2018 Validity EndDate:13/02/2023 
Dear Sir
 

Please refer to your letter Nos. SMPL/DM/D20/18/01 dated 16.01.2018 on the above subject.

Based on DGMS approval No. 504 of 2004 issued by this Directorate’s letter No. 333/323/EHQ dated 13.02.2004, BIS Licence No. 5805269 and above test reports under reference, I hereby renew the approval upto 13.02.2023 from the date of expiry i.e. from 13.02.2018 for use in belowground Coal Mines, subject to compliance with conditions stipulated in the original approval as well as annexure enclosed with this renewal letter.

Please note that application for renewal should be made at least three (03) months before the date of expiry of the approval.     

 

(Prasanta Kumar Sarkar)
Director General of Mine Safety - Dhanbad (HQ)

                                                

Annexure

Conditions for renewal of DGMS approval No. 504 of 2004 under Regulation 208 (3) of the Coal Mines Regulations, 2017 for flameproof gate end box cum starter rated upto 90 KW at upto 550 V, designated by type No. KSL-1 in mild steel fabricated flameproof enclosure manufactured by M/S SAIT Mine Line Pvt. Ltd., Kolkata conforming to IS/IEC 60079-1:2007 and IS/IEC 60079-0:2004 for use in belowground Coal Mines.

  1. (i) Every unit shall carry conspicuously in a permanent manner the aforesaid    identification mark, i.e. ‘DGMS APPROVAL NO. 504 of 2004 renewed vide   this DGMS letter    

In addition, every unit shall also carry permanently this Directorate’s approval mark as given below :

 

(ii) In the nameplate marking shall be in accordance with the applicable requirements of the relevant standards.

2.       (a)The design of the electrical circuit shall not be changed without obtaining prior approval from this Directorate.

          (b)Conspicuous warning inscriptions against opening the cover of the main enclosure or of any apparatus which gives access to the flameproof enclosures on live parts or which is designed to receive cable attachment unless the supply to the unit is isolated at source, shall be affixed permanently on the respective part to ensure that all live parts within the unit are made dead and safe.

3.       Spare parts shall be made readily available to the user as and when required for proper maintenance of the equipment.

4.       (a) The customer shall be supplied the copy of this approval letter, the test report from the testing laboratory with the lab certified drawing , an extract of the condition & special conditions, maintenance schedule, if any, recommended by the testing laboratory in their test report(s) so as  to maintain safety features of apparatus/equipment.

          (b) The customer shall also be provided a copy of factory test report along with drawings, instruction manual on the installation, operation and maintenance of the equipment and spares parts catalogue at the time of delivery of the equipment.

5.       The user shall furnish the performance report of the equipment directly to this Directorate after one (01) year of actual use.

6.       Any modification to the equipment that might be considered necessary at a later date shall be effected upon being so directed by this Directorate.

7. While seeking renewal of approval, valid BIS license in the case of Indian manufacturers and in case of foreign manufacturers, QAR/QAN, as may be applicable shall be submitted and the same shall remain valid as long as the apparatus is manufactured and marketed.

8.       An officer of this Directorate may at any time draw a sample either from the factory or from the user and get it tested at the cost of the manufacturer.  If the test reports are not satisfactory, this approval shall be deemed to be suspended.

9.       If there occurs any revision of standards applicable to the product/equipment , the manufacturer shall get the product/equipment tested as per revised standards and submit test reports to the  customer  for information and to this  Directorate for further approval/renewal.

10.     The cable entry devices, threaded adaptors and stopping plugs shall be suitable for the equipment and be considered as a part of equipment (not a component).  The cable entry device and cabling methods used shall be suitable for their intended duty and for the special type of cable used in mining.  Such cable entry devices shall be duly certified as per relevant IS/IEC standards.

11.     The approval of the subject equipment is with regard to Ex standards mentioned herein.  Other relevant standards applicable for assessment of its electrical parameters required under type test have not been taken into consideration.

12.     All circulars/general approvals issued by DGMS from time to time, relevant to the equipment shall also be complied with.

13.     In case of any permissible variations issued from this Directorate, they shall also be read along with this letter and the original approval letter.

14.     The approval is renewed upto 13.02.2023 from the date of expiry i.e. from 13.02.2018.

            15.     The equipment manufactured subsequently shall be identical to the proto type tested at CIMFR vide test report nos. CIMFR/TC/SR/1361 dated 11.01.2013, CIMFR/TC/P/480 dated 13.09.2013.

16.     At the time of applying for renewal, details of supply with name of mines, purchase order and date shall be furnished with the application.

17.     If at any time any of the conditions subject to which this approval has been granted, is violated or not complied with, this approval shall be deemed to have been revoked with immediate effect.

18.     The above approval may be amended or withdrawn at any time, if considered so necessary in the interest of safety and is being issued without prejudice to any other provisions of law which may be or may become applicable at any time.

 
Your Faithfully,
(Prasanta Kumar Sarkar)
Director General of Mine Safety - Dhanbad (HQ)
 
 
Back